Tab- Refill - Duo Page:300265

	Ink Specification: The refill for this teacher stamp is flash ink for flash manufactured stamps only.
	SPECIAL OFFER Refill Ink: Add a refill to your stamp order to benefit from discounted prices. Please note, the quantity supplied will be the same as the number of stamps bought. For a different quantity with your stamp order - click here
	How to Refill a Shiny Self-inking DUO Flash Stamp 1. Remove the stamp from the base. 2. (You may wish to wear gloves as it is possible you will get a small amount of ink on your hands). With the stamp face pointing upwards, holding the handle push the tab on one end of the stamp with your thumb - this should unclick to release the stamp face from the mount. If this proves difficult you can carefully lever the face plate by using a tool like a flat end screwdriver or equivalent. 3. Place the stamp face, face down in the bottom cover/tray in the unlock position. 4. Add 3-4 drops of ink to each of the holes on the back of the stamp face. 5. Leave for a short while until the ink is absorbed and so will not run when moved. 6. Reassemble the stamp by sliding the plate back into the mount. 7. Leave for a few hours for the ink to fully absorb.
	Video: Coming soon!
	Important Stamp Refill Ink Notes: - Always refill with the correct ink for your stamp. Ink specifications vary and the wrong ink could ruin your stamp. - Refilling with a different colour ink onto the existing stamp pad does not change your stamp's colour.